Kodak 4600 Tips

READING LIGHT

There is a small “light” available on the Bulb Door (so you don’t have to turn on the lights in the room you’re using).

---

ADJUSTING THE HEIGHT

Note that there are NO height adjustors on the back of the projector.  You’ll have to change the height of the table, or place a book (or similar) under the projector if the projected image is still not high enough on the screen or wall.

Loading Slides in the Tray

Loading slides is really easier than most people think it is.  You can do it in just two steps:
1. Hold the slide up to the light, and orient it the way it is supposed to be viewed (as if it was a print instead of a slide).  -then-
2. Turn it upside-down, and put it in the tray. Of course pay attention to the numbers on the tray and place the slides in the correct sequence.  That’s it.


As long as the Dots are all facing the same direction (so you can see them), the slides will be in the correct orientation for projecting.